Custom Designed Labtec / HPR Solutions
SINGLE STAND ALONE UNIT
The fluid cooler stainless 316l Stainless steel body and tube with A4 hardware.
FITTINGS 6mmOD 4mm ID tube Fitok fittings.
Rated 350 bar and 700 Degrees C can be used for fuel and oil stampling
ADD AS MANY AS YOU NEED
The fluid cooler stainless 316l is designed to cool sample fluids from a high temp to a lower one with out the need for external power. For instruments to measure f fuel and oil stampling quality.
Suitable for ATEX and IECEx Solutions with a few simple mods
Typical sample rate for the fluid cooler stainless 316l will be 25mL/min @1 to 5 Bar.
Expected temp drop for fuel and oil stampling from 170 Degrees C to Less than 70 Degrees C in 4 units or less while at an ambient Temp of 45 degrees C. All parts 316L stainless steel and A4 hardware